80mm High Speed Stepper Motor 7 Colors 0-11000 Tachometer Rpm Gauge

Model NO.: YC101357
Main Features:
 
High speed Stepper motor with a quick response !!(Please check the video in product page)
 
Maximum angle of deflective 270 (full sweep) is controlled by the microcomputer numerous to divisior
to provide high precision in the accuracy of information generated
The stepping motor is sufficient for quick response of all sorts of professional motorsports
 
LED illumination:
The gauge dial is invisible while the ignition switch is off. Once the ignition switch is turned on, a clear
display appears by colored LED illumination
The gauge dial illumination and the red emitting needle pointer provide high visibility
 
Opening and closing modes:
The gauge dial and the needle pointer performs opening and closing modes interlocked with turning
ON/OFF of the ignition
 
Adjustable color:
Choose the color of backlights according to personal preference. 7 colors are available
 
Dual warmings of light and buzzer:
Two customer-defined warning RPMs can be set. When the Rpms are exceeded, the warning LED
blinks/ lights up and the warning buzzer sounds
 
Exclusive large-sized indicator:
The exclusive large-sized indicator which lights in green and red enhances the visibility of warnings in
addition to the warning LEd in the gauge
 
Peak memory function:
The maximum RPM during driving can be stored and checked later
 
Detachable switch unit:
The large-sized switch unit with light is fixable on the gauge and is also detachable
 
Exclusive mounting band and back case:
The gauge is clinched by using the exclusive mounting band and back case. Wires can be stored in
the back case neatly
 
Fitment:
All 12V,1-8 cylinder and gasoline car.
 
Package Include:

1 × 80MM Tachometer Gauge 

1 × Shift Light

1 × Mounting Bracket

1 × Meter Cup

1 × Installation Manual80mm High Speed Stepper Motor 7 Colors 0-11000 Tachometer Rpm Gauge

80mm High Speed Stepper Motor 7 Colors 0-11000 Tachometer Rpm Gauge
80mm High Speed Stepper Motor 7 Colors 0-11000 Tachometer Rpm Gauge
80mm High Speed Stepper Motor 7 Colors 0-11000 Tachometer Rpm Gauge

 

80mm High Speed Stepper Motor 7 Colors 0-11000 Tachometer Rpm Gauge

 

Screw Chiller is called screw chiller because of its key component-compressor. The unit is made of gas refrigerant from the evaporator; after the compressor is adiabatically compressed, it becomes a high temperature and high pressure state. The compressed gas refrigerant is cooled and condensed in the condenser at equal pressure, and after condensing, it changes into a liquid refrigerant, and then expands to a low pressure through a throttle valve to become a gas-liquid mixture. The liquid refrigerant under low temperature and low pressure absorbs the heat of the material to be cooled in the evaporator and becomes gaseous refrigerant again. The gaseous refrigerant re-enters the compressor through the pipeline and starts a new cycle. The principle flow of screw chiller is divided into air cooling and water cooling.

Screw Chiller

Water Cooled Screw Chiller,Screw Water Chiller,Water Cooled Screw Compressor Chiller,screw top water cooler,screw water cooled liquid chiller,water cooled screw chiller trane,Water cooled flooded screw chiller, Screw type water chiller plant‎

Shenzhen Toyocool Refrigeration Equipment Co.,Ltd. , https://www.toyochiller.com